Home > Categories > New Products
Dual M.2 NVMe Ports to PCIe 3.0 x16 Bifurcation Riser Controller - Support Non-BiFurcation Motherboard - SI-PEX40129
Part Number: SI-PEX40129UPC: 857426008017The I/O CREST SI-PEX40129 is a great accelerated secondary storage solution for any workstation with true PCIe 3.0 x8 bandwidth (x16 Interface). It has two M.2 NVMe ports to accept two NVMe M.2 SSDs, so each NVMe M.2 SSD has dedicated PCIe 3.0 x4 bus bandwidth. It delivers transfer speeds 20 times faster than SATA SSDs. By by-passing the traditional PCIe 3.0 x4 NVMe solutions, using the SI-PEX40129 will allow user add 2 M.2 NVMe into any non-Bifurcation PCIe x16 slot to achieve their full potential with a bandwidth of up to 6,500 MB/s. Unlike onboard DMI 3.0 based NVMe solutions or Single NVMe PCI-e x4, which are forced to share a single PCIe 3.0 x4 lane with the motherboard's data ports, the SI-PEX40129 combines 2- M.2 drives to be able to run on PCIe 3.0 x16 lane. This unique architecture allows the drive to interface directly with the platform's CPU, which provides PCIe x4 bandwidth for each NVMe SSD!
10 Gigabit 10GBase-T NBASE-T Ethernet PCI-e x4 Network Card - SD-PEX24055
Part Number: SD-PEX2405510 Gigabit 10GBase-T NBASE-T Ethernet PCI-e x4 Network Card - SD-PEX24055
Part Number: SD-PEX24055UPC: 810154018444The SD-PEX24055 NIC supports 10GBASE-T Ethernet in compliance with the IEEE 802.3an standard, as well as 5 Gbps and 2.5 Gbps Ethernet speeds over standard Cat 5e and Cat 6 copper cables. Compliant to the IEEE 802.3bz standard ratified in September 2016, the SD-PEX24055 NIC is also backwards-compatible with legacy 1000BASE-T Ethernet. The AQN-107 is a single-chip, single-port, high-performance PCIe 3.0 Multi-Gig 10GBASE-T/5GBASE-T/2.5GBASE-T/ 1000BASE-T/100BASE-TX Ethernet adapter. It incorporates Aquantia's AQrate PHY technology to deliver 10 GbE, 5 GbE and 2.5 GbE network connectivity speeds over 100 m with zero change required for legacy cabling. Speeds ranging from 5 GbE to 100 M are supported by Cat 5e cabling while 10GbE requires a minimum of Cat6 with Cat 6a running up to 100 m.
10 Gigabit 10GBase-T Ethernet PCI-e x4 Network Card - SY-PEX24056
Part Number: SY-PEX2405610 Gigabit 10GBase-T Ethernet PCI-e x4 Network Card - SY-PEX24056
Part Number: SY-PEX24056UPC: 857426008000The SY-PEX24056 Network Adapter hosts the latest Tehuti TN4010 controller, an optimized 10GbE controller designed for low-power, low-cost and single-port applications. The TN4010 MAC is paired with one of the Marvell Alaska X 88X3310P/88E2010P transceivers, single-port, low power, high performance NBASE-T PHYs devices that support IEEE 802.az Energy Efficient Ethernet (EEE). The Tehuti adapter reference design supports auto-negotiation allowing the NBASE-T solution to optimally select the best speed: 10 Gigabit Ethernet (10GbE), 5 Gigabit Ethernet (5GbE), 2.5 Gigabit Ethernet (2.5GbE), 1Gigabit Ethernet (GbE) or 100 Megabit Ethernet (100MbE) over Cat5e/Cat6 or better cabling.
10 Gigabit Ethernet Network Thunderbolt 3 Adapter - SI-TDB24060
Part Number: SI-TDB2406010 Gigabit Ethernet Network Thunderbolt 3 Adapter - SI-TDB24060
Part Number: SI-TDB24060UPC: 857426008093The SI-TDB24060 network adapter offers a portable, bus powered, fanless and low-cost 10GbE solution enabling 10GBase-T and NBASE-T (IEEE 802.3bz-2016) connectivity for Apple OS X and Microsoft Windows environments over Thunderbolt. This network adapter is ideal for Thunderbolt 3 capable notebooks like the MacBook Pro (late 2016) and professional workstations that require reliable, accelerated access to external storage and networks for I/O demanding applications.
2 Port RS-232 DB9 Serial M.2 B+M Key Controller Card - SI-ADA15069
Part Number: SI-ADA150692 Port RS-232 DB9 Serial M.2 B+M Key Controller Card - SI-ADA15069
Part Number: SI-ADA15069UPC: 857426008550The IOCrest SI-ADA15069 lets you add 2 RS-232 serial ports to your embedded computer thought a free M.2 Slot. To be used in applications such as serial attached devices, serial networking/monitoring equipment, data acquisition system, POS terminal and industrial PC, add-on I/O cards-serial/usb, and Embedded systems -For I/O expansion
2.4GHz Wireless Vertical Ergonomic Optical Mouse, 800/1200/1600 DPI, 5 Buttons for Laptop, Desktop, PC, Macbook - SY-MOU23066
Part Number: SY-MOU23066UPC: 857426008031The ergonomically-designed thumb rest and grips fit the contour of your palm for maximum comfort. The vertical "handshake" position encourages a neutral wrist and arm alignment for greater comfort. Five buttons give you improved control over your computer's systems combined with three levels of mouse sensitivity (800 / 1200 / 1600DPI) for improved tracking. There is also an auto-sleep feature that conserves power and extends product life.
2.5" NVMe U.2 SSD and 2.5in SATA SAS Drive Mobile Rack For External 3.5" Drive Bay - SY-MRA25059
Part Number: SY-MRA250592.5" NVMe U.2 SSD and 2.5in SATA SAS Drive Mobile Rack For External 3.5" Drive Bay - SY-MRA25059
Part Number: SY-MRA25059UPC: 857426008253With up to 32GB/S bandwidth that supports 2.5 inch SATA and SAS drives, this mobile rack has the fastest transfer speeds for whatever task you throw at it. Able to support U.2 hot swap, ease of use is greatly improved as it also works as a bay for any standard SATA SAS drives and SSDs, complete with an anti-dust flap on the slide mini trays.
5.25" Bay Drive Tray Less Security Lock Mobile Rack for 3.5" and 2.5" SATA III HDD with extra 2 port USB 3.0 - SY-MRA55007
Part Number: SY-MRA55007UPC: 857426008406The SY-MRA55007 5.25" bay tray less mobile rack for 3.5" and 2.5" SATA III HDD with extra 2 port USB 3.0 can be installed into any open 5.25" drive bay, providing easy access to a bare 2.5" and 3.5" hard drive or solid state drive from the front of a computer case. To remove the hard drive, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive. The mobile rack also included two extra USB 3.0 port which can be hooked to any motherboard with 19 pin USB 3.0 header.
6 Port SATA III to PCIe 3.0 x1 NON-RAID Expansion Card SY-PEX40166
Part Number: SY-PEX401666 Port SATA III to PCIe 3.0 x1 NON-RAID Expansion Card SY-PEX40166
Part Number: SY-PEX40166 UPC: 857426008444The SY-PEX40166 adds 6 SATA 6G ports through a PCIe 3.0 x1 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.
8 Bay 2.5 Inch and 3.5 Inch SATA Hard Drive External USB 3.0 Hard Drive Enclosure - SY-ENC50119
Part Number: SY-ENC501198 Bay 2.5 Inch and 3.5 Inch SATA Hard Drive External USB 3.0 Hard Drive Enclosure - SY-ENC50119
Part Number: SY-ENC50119UPC: 857426008215SYBA SY-ENC50119 8 bay 2.5" and 3.5" USB3.0 SATA External Enclosure is a quick and simple way to expand storage capacity. Latest controller and firmware support 8 x 18TB drives. Unique independent switch designallows drives to be powered off individually, prolonging the life of the drives.SY-ENC50119 with USB 3.0 5Gbps Superspeed interface helps to transfer your files in a breeze,USB3.0 connection 10x Faster to USB2.0 and compatible with USB2.0,1.1,1.0. Plug and Play,No additional driver or utility needed.
802.11AX Wifi 6 Dual Band and Bluetooth 5.0 PCI-e x1 Wireless Card - SI-PEX23067
Part Number: SI-PEX23067802.11AX Wifi 6 Dual Band and Bluetooth 5.0 PCI-e x1 Wireless Card - SI-PEX23067
Part Number: SI-PEX23067UPC: 810154018727Based on Intel AX200 chipset, this WiFi 6 PCIe card supports the latest 802.11ax technology, such us OFDMA, 1024QAM, Target Wake Time, deliver from 80MHz to 160MHz higher peak data rates up to 2.4Gbps, and up to 4X capacity improvement in dense or congested environments comparing to 802.11ac. With this PCIE Wi-Fi Card, you can enjoy 4K/8K movies, large file transfer, and smart home devices without dropped connections.
Cable Management Cord Organizer 5 Channel Desk Cable Clips Wire Cord Holder - SY-ACC65095
Part Number: SY-ACC65095Cable Management Cord Organizer 5 Channel Desk Cable Clips Wire Cord Holder - SY-ACC65095
Part Number: SY-ACC65095UPC: 857426008055This 5 Channel Silicone Cord Holder is Strong and Long Lasting and Space Saving. We choose high-quality silicone with good elasticity.
Dual 2.5 Gigabit M.2 B+M Key Ethernet Network Expansion Card
Part Number: SI-MPE24078Dual 2.5 Gigabit M.2 B+M Key Ethernet Network Expansion Card
Part Number: SI-MPE24078UPC: 857426008932The M.2 to Dual 2.5 Gigabit Ethernet NIC allows the expansion card to be internally mounted in the smaller computing system and provides a secure network connection to the device. It allows users the benefits of increased bandwidth, distance and security provided through fiber-based transmission in their small footprint networking device. M.2 Ethernet Gigabit NICs provide the ideal 2.5 gigabit connection solution for new micro, mini and thin computers. It supports high performance dual channel networking and full duplex communication to achieve up to 2500 Mbps and fast transfer rates, yet is compatible with existing Ethernet. It comes with a comprehensive of software drivers for all desktop operating systems, including Microsoft Windows, and Linux
Dual Port 10 Gigabit Ethernet Network Adapter, Intel X550-AT2 Chipset - SY-PEX24069
Part Number: SY-PEX24069Dual Port 10 Gigabit Ethernet Network Adapter, Intel X550-AT2 Chipset - SY-PEX24069
Part Number: SY-PEX24069UPC: 857426008635The SY-PEX24069 NIC supports 10GBASE-T Ethernet in compliance with the IEEE 802.3an standard, as well as 5 Gbps and 2.5 Gbps Ethernet speeds over standard Cat 5e and Cat 6 copper cables. Compliant to the IEEE 802.3bz standard ratified in September 2016, the SY-PEX24069 NIC is also backwards-compatible with legacy 1000BASE-T Ethernet. The X550-AT2 is a single-chip, single-port, high-performance PCIe 3.0 Multi-Gig 10GBASE-T/5GBASE-T/2.5GBASE-T/ 1000BASE-T/100BASE-TX Ethernet adapter. It incorporates Intel Ethernet Controller X550-AT2 to deliver 10 GbE, 5 GbE and 2.5 GbE network connectivity speeds over 100 m with zero change required for legacy cabling. Speeds ranging from 5 GbE to 100 M are supported by Cat 5e cabling while 10GbE requires a minimum of Cat6 with Cat 6a running up to 100 m.
HDMI TO A/V RCA Composite Converter Cable Adapter - SY-ADA31064
Part Number: SY-ADA31064HDMI TO A/V RCA Composite Converter Cable Adapter - SY-ADA31064
Part Number: SY-ADA31064UPC: 810154010981The HDMI to video and audio converter converts HDMI VIDEO to 3 RCA composite video cvbs. It allows video device equippped with only HDMI output to be connected to analog TV CRT Monitor, or Projector via RCA/AV. Perfect for AV equipment testing, CCTV monitoring, HD PC to TV, DV to Projector and Education, business promotion, conference, exhibition etc. The adapter supports Roku, DVD, cable boxes, and PS3, Xbox 360, Blu-ray machines and so on.Notes:Do not support 3D, can not be use as RCA(AV)to hdmi converter.Please do connect the power cable with 5V power first to make the unit work before connecting to other ports
M.2 M-key and M.2 B-key SSD RGB Adapter Card with Heatsink 5V ARGB PIN - SI-RGB40147
Part Number: SI-RGB40147M.2 M-key and M.2 B-key SSD RGB Adapter Card with Heatsink 5V ARGB PIN - SI-RGB40147
Part Number: SI-RGB40147UPC: 810154010998The expansion card lets you take full advantage of the fast performance and compact size of PCI-e M.2 NVMe and SATA base M.2 also adding RGB Lighting to your system.The adapter connects directly to your computer motherboard to support an M.2 NVMe SSD through ultra-fast x4 PCI-e. It also can convert a M.2 SATA based SSD to SATA interface that can be directly connected to the motherboard SATA port.Comes with Advanced Aluminum alloy shell make heat-dissipation more Efficiently. The heat-dissipation function is maximized to facilitate heat dissipation of the hard disk during operation, and can fully utilize the powerful performance of the hard disk.
