SATA III 2 Internal 6Gbps Ports PCI-e Controller Card
Number: SY-PEX40039 Description:
Engaged in High Speed I/O solution development, this card enables Serial ATA PHY up to 6Gbps high speed interface, following Serial ATA Revision 3.0 specification
ASM1061 Chipset (Asmedia 1061 SATA Host Controller)
Compliant with PCI-Express Specification V2.0 and Backward Compatible with PCI-Express 1.x
Compliance Serial ATA AHCI Spec. Rev. 1.3, Serial ATA Rev. 3.0
Supports Hot Plug and Hot Swap
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Supports 2 Ports Serial ATA
Supports Native Command Queue (NCQ)
Supports Port Multiplier
This card is bootable.
Can use 2 at same time.
Works with SSDs
Booting compatibility differs with older Motherboard BIOS. If your motherboard SATA ports use ASMedia chipset, this will be bootable with no issues.
However if using Marvell SATA onboard chipset, you may not see the disks connected to be bootable.
Dimension: L 1 x W 5 x H 7 inch
Weight: 0.3 lb
SATA III (6Gbps) Internal 2-port PCI-E Card
SATA Cable (18")
Windows 7 (32/64bit)
Computer with One Available PCI-e Slot
Win 8 install