This M.2 SSD PCI-E adapter enables you to install a new top of the line m.2 PCI-E SSD into your system. Fully equipped to house a range of M.2 SSDs into a PCI-E x4 lane. This is a simple and elegant solution to replace your current HDDs. Once installed you can use this adapter to boot to the M.2 at high SATAIII speeds.
This M.2 adapter turns a regular M.2 SSD drive into a U.2
SSD. The drive can then connect to SFF-8643 connector in
the system via a SFF-8639 to U.2 cable, resulting in a drive
with the same performance as it would be if it had been
installed on a PCIe slot.
IOCrest SI-ADA40121 provides the capability to utilize an Intel 750 Series 2.5" NVMe SSD (SFF-8639). Comes with PCIe 3.0 x4 (12 Gbps) bandwidth that can be used if motherboard comes with M.2 M-key slot. Otherwise M.2 adapter will be needed.
The M.2 B&M Key PCIe SATA RAID controller card employs the Marvell HyperDuo technology to take the advantages of the rapid response of a solid state drive and the spacious capacity of a hard disk drive, to form an ultimate total solution for a high performance, cost effective and large storage system.
The PCI Express card expands your PC by two M.2 slots as well as two SATA connectors. You can connect up to two M.2 modules in format 2280, 2260, 2242, and 2230, while also being able to connect up to two SSDs or HDDs through SATA. Supports RAID 0, RAID 1, RAID 10, and HyperDuo.
The IOCrest SI-PEX40110 allows you to install an M.2 NGFF PCIe SSD with a high or low profile PCI 3.0 x4 card to your System. It is designed to work only with 'M' key M.2 PCIe SSD. Not compatible with a 'B' key M.2 PCIe x2 SSD or 'B' key M.2 SATA SSD.
The M.2. adapter turns a regular M.2/NVMe drive intoa 2.5" U.2 SSD. This allows installing the M.2. device to a drive bay instead of a PCIe slot. The drive can then connect to SFF-8643 connector in the system via a SFF-8639 to U.2 cable, resulting in a drive with the same performance as it would be if it had been installed on a PCIe slot.
Want to enjoy the speeds of M.2 SSD without going through the hassel of changing your motherboard? Use our MicroUSB 3.1 M.2 & mSATA external enclosure. This device is capable of accessing both M.2 and mSATA simultaneously.
Unleash the performance of your M.2/mSATA storage devices with this Syba 2-Port mSATA & M.2 PCI-E 2.0 RAID Card. Select from 4 operating modes with the built-in config switch, including RAID 0, RAID 1, JBOD, and Normal (AHCI) operation. The dual lane, PCI-E x4 interface will mean no bottlenecks to slow down your latest M.2(NGFF)/mSATA SSDs.