Home > Categories > IT Products > Hard Drive Mobile Rack > 3.5” 3-Bay SATA/SAS HDD Internal Enclosure

3.5” 3-Bay SATA/SAS HDD Internal Enclosure
3-Bay SATA Mobile Rack

Part Number: SY-MRA35029 Brand: Syba

  • Fits three 3.5 SATA & SAS Drives and takes two empty 5.25" bay slot
  • Tool-free and tray-less design; it applies patent NSS connector for 50,000 hot-swap cycles guaranteed
  • 6x6 cm fan to enhance heat dissipation
  • Intelligent temperature control design; special firmware to control the fan
  • Independent power control switch and LED indicator
  • Dual alarm system: buzzer and light indicator
  • Completely watch over the working status and secure the data safely

The SY-MRA35029 has been designed to maximize space use by allowing up to 3  3.5” SATA III hard drives, while only consuming two 5.25” device bays. The enclosure only requires one molex and one SATA power to power up the three 3.5” hard drives. With the tray-less technology, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive. On the rear of the SY-MRA35029 uses a 60mm cooling fan to pull cool air from the front ventilation slots, over the drives, and exhaust the warm air out through the rear ventilation slots. The enclosure features Intelligent Fan Controller that will alarm the user if the temp reaches 55/60 or 65c

Windows 7, 8, 10, Mac 9.3 or Higher, Linux
Package Information
Package Dimensions: L 10.00 × W 7.00 × H 4.75 in
Package Weight: 3.40lb
UPC: 810154010639
Package Content

  • 1x 3 Bay Mobile Rack
  • 8x Screws
  • 1x User Manual
  • 2x Key
  • 3x SATA Cable

Two empty 5.25" bay slots

Techincal Question
If you have any technical questions or need troubleshooting please contact us here
General Inquiry

Please describe your question below and press the submit button. Our Syba team will reply as soon as possible.