This M.2 SSD PCI-E adapter enables you to install a new top of the line m.2 PCI-E SSD into your system. Fully equipped to house a range of M.2 SSDs into a PCI-E x4 lane. This is a simple and elegant solution to replace your current HDDs. Once installed you can use this adapter to boot to the M.2 at high SATAIII speeds.
With our SI-PEX40109 device, you are able to connect up to four mSATA devices. This device features the Marvel BIOS Utility to setup RAID 0, 1, and 10. Go up to 10Gbps with bandwidth capability of PCI-e x2.
The PCI Express card expands your PC by two M.2 slots as well as two SATA connectors. You can connect up to two M.2 modules in format 2280, 2260, 2242, and 2230, while also being able to connect up to two SSDs or HDDs through SATA. Supports RAID 0, RAID 1, RAID 10, and HyperDuo.
The IOCrest SI-PEX40110 allows you to install an M.2 NGFF PCIe SSD with a high or low profile PCI 3.0 x4 card to your System. It is designed to work only with 'M' key M.2 PCIe SSD. Not compatible with a 'B' key M.2 PCIe x2 SSD or 'B' key M.2 SATA SSD.
The M.2. adapter turns a regular M.2/NVMe drive intoa 2.5" U.2 SSD. This allows installing the M.2. device to a drive bay instead of a PCIe slot. The drive can then connect to SFF-8643 connector in the system via a SFF-8639 to U.2 cable, resulting in a drive with the same performance as it would be if it had been installed on a PCIe slot.
Want to enjoy the speeds of M.2 SSD without going through the hassel of changing your motherboard? Use our MicroUSB 3.1 M.2 & mSATA external enclosure. This device is capable of accessing both M.2 and mSATA simultaneously.
This SFF-8643 converter turns the connector for a PCIe x4 slot. This allows connecting the high performance 2.5" NVMe U.2 (SFF-8639) SSD to system via a SFF-8643 cable. It is a simple and economical solution for system that already has the PCIe x4 sockets on board. It also can support M.2 M-key SSD.
This 2.5" SATA 6G / USB 3.0 to dual mSATA RAID adapter is an economical choice to use a Intel mSATA SSD as a 2.5" SATA storage device. Once installed onto a PC/notebook, the Intel mSATA SSD appears as an ordinary SATA storage to any OS and can be configured as a bootable device. Additionally, this adapter supports RAID 0 (Stripe), RAID 1 (Mirror), JBOD (Port Multiplier) and SPAN (Big) with low power and high efficient RAID operation and easy configurable through GUI.