The M.2 B&M Key PCIe SATA RAID controller card employs the Marvell HyperDuo technology to take the advantages of the rapid response of a solid state drive and the spacious capacity of a hard disk drive, to form an ultimate total solution for a high performance, cost effective and large storage system.
With our SI-PEX40109 device, you are able to connect up to four mSATA devices. This device features the Marvel BIOS Utility to setup RAID 0, 1, and 10. Go up to 10Gbps with bandwidth capability of PCI-e x2.
The PCI Express card expands your PC by two M.2 slots as well as two SATA connectors. You can connect up to two M.2 modules in format 2280, 2260, 2242, and 2230, while also being able to connect up to two SSDs or HDDs through SATA. Supports RAID 0, RAID 1, RAID 10, and HyperDuo.
Turn an mSATA host connection into a standard SATA port. The SI-ADA40113 mSATA to SATA adapter enables you to connect a standard SATA drive to an available mSATA port. The adapter improves system capacity by enabling an mSATA port to host a larger SATA hard drive. For guaranteed compatibility and performance the adapter is compliant with SATA I/II/III revisions, allowing for transfer speeds up to 6Gb per second.
The IOCrest SI-PEX40110 allows you to install an M.2 NGFF PCIe SSD with a high or low profile PCI 3.0 x4 card to your System. It is designed to work only with 'M' key M.2 PCIe SSD. Not compatible with a 'B' key M.2 PCIe x2 SSD or 'B' key M.2 SATA SSD.
The M.2. adapter turns a regular M.2/NVMe drive intoa 2.5" U.2 SSD. This allows installing the M.2. device to a drive bay instead of a PCIe slot. The drive can then connect to SFF-8643 connector in the system via a SFF-8639 to U.2 cable, resulting in a drive with the same performance as it would be if it had been installed on a PCIe slot.
Want to enjoy the speeds of M.2 SSD without going through the hassel of changing your motherboard? Use our MicroUSB 3.1 M.2 & mSATA external enclosure. This device is capable of accessing both M.2 and mSATA simultaneously.
This 2.5" SATA 6G / USB 3.0 to dual mSATA RAID adapter is an economical choice to use a Intel mSATA SSD as a 2.5" SATA storage device. Once installed onto a PC/notebook, the Intel mSATA SSD appears as an ordinary SATA storage to any OS and can be configured as a bootable device. Additionally, this adapter supports RAID 0 (Stripe), RAID 1 (Mirror), JBOD (Port Multiplier) and SPAN (Big) with low power and high efficient RAID operation and easy configurable through GUI.