The SY-MRA35030 has been designed to maximize space use by allowing up to four 3.5” SATA III hard drives, while only consuming three 5.25” device bays. The enclosure only requires one molex and one SATA power to power up the four 3.5” hard drives. With the tray-less technology, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive. On the rear of the SY-MRA35030 uses a 80mm cooling fan to pull cool air from the front ventilation slots, over the drives, and exhaust the warm air out through the rear ventilation slots. The enclosure features Intelligent Fan Controller that will alarm the user if the temp reaches 55,60 or 65c
The SY-MRA35029 has been designed to maximize space use by allowing up to 3 3.5” SATA III hard drives, while only consuming two 5.25” device bays. The enclosure only requires one molex and one SATA power to power up the three 3.5” hard drives. With the tray-less technology, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive. On the rear of the SY-MRA35029 uses a 60mm cooling fan to pull cool air from the front ventilation slots, over the drives, and exhaust the warm air out through the rear ventilation slots. The enclosure features Intelligent Fan Controller that will alarm the user if the temp reaches 55/60 or 65c
With the SY-HUB15054 USB 2.0 to 4 Port Serial Adapter, you are able to connect a
single USB port to control and monitor four RS232 serial ports. This can then
be used on applications such as POS Printer Terminal, Networking Systems, PLC
Instrumentation device, Data Acquisition, and I/O Control modules.
This 4-port power adapter hub allows you to charge your usb devices in style. Features usb covers to keep out dust and other materials from coming in contact with the ports. Has an extension cable to not have to be limited to being near a wall outlet.
With our SI-PEX40109 device, you are able to connect up to four mSATA devices. This device features the Marvel BIOS Utility to setup RAID 0, 1, and 10. Go up to 10Gbps with bandwidth capability of PCI-e x2.
Add 2 RS-232 DB9 serial ports to your full height or low profile computer through a PCI Express x1 slot with IOCrest SI-PEX15037 PCI-Express x2 serial controller card. The RS232 Serial Adapter Card is compatible with a broad range of operating systems, including Windows and Linux (Kernel 2.6.11 and up). Plus, the adapter card includes an optional half-height/low profile bracket that allows the card to be installed in virtually any computer case.
The PCI Express card expands your PC by two M.2 slots as well as two SATA connectors. You can connect up to two M.2 modules in format 2280, 2260, 2242, and 2230, while also being able to connect up to two SSDs or HDDs through SATA. Supports RAID 0, RAID 1, RAID 10, and HyperDuo.
Do you want to use your Mini PCI express port for the next generation USB Type C? Now you can with our Mini PCIe to USB Type C card. Also comes with a 2 pin to Molex connector in order to get the extra power USB Type C needs.
Be able to connect your USB Type-C port computer to a legacy VGA display, such as a monitor or projector up to 1920 x 1200 and 1080p (Full HD) for compatibility with most displays, monitors and projectors with VGA; Audio must be transmitted separately
Add three USB 3.0 ports and a Gigabit Ethernet port to your desktop computer through a PCI Express expansion slot. By combining three USB 3.0 ports and one RJ45 port onto a single card, you only need a single PCIe slot for installation.The super Speed USB 3.1 Gen1 standard, operating at 5 Gbps full-duplex mode, is 10 times faster than USB 2.0 High-Speed standard. Support for advanced features such as jumbo frames and VLAN tagging means you can optimize network traffic as needed. The 10/100/1000M Gigabit Ethernet port is Energy Efficient Ethernet (EEE) base on digital signal processing (DSP) technology with low dissipation.
The 192kHz/24 bit DSD USB Audio DAC is an ultra transparent mastering grade digital audio playback system. The 192kHz/24 bit DSD DAC is capable of converting high resolution PCM audio up to 192 kHz, and DSD audio(up to 128XDSD). The Dac allows you to bypass your computer's soundcard or headphone output and send digital audio signal through the USB interface. With this perfect digital interface between your computer and the music system, the sound quality is pushed to another higher level in your overall music environment.
The SY-HUB15053 USB 2.0 to 4 Port Serial RS232 Adapter converts a single USB port into four RS232 serial ports to be used with serial devices. This Industrial Grade device can be used on applications such as: POS Printer Terminals, Networking System, PLC Instrumentation device, and Data Acquisition I/O Control Module.
The USB-C with Power Delivery and USB 3.1 Gen 1 3-port Hub is compliant with USB specification Rev. 3.1. It allows you to expand your tablet's, notebook's, phone, or PC's USB-C port by three additional ports, and you are able to charge the tablet or notebook through this hub. You may also connect different kinds of USB Devices to this product as well.