This full size 4 port Mini PCI-Express to SATA III Controller Cards allows you to add 4 SATA III connections to a small form factor system. This is a great way to upgrade or expand the capabilities of your current system. This controller is compatible with Serial ATA devices.
The IOCrest CAT7 Flat Patch Cords fit in the tightest spaces where regular CAT7 patch cord is too bulky. These flat, fully molded cables give a neat appearance to desktops, wall outlets and are suitable for 10 Gigabit Ethernet applications.
This M.2 SSD PCI-E adapter enables you to install a new top of the line m.2 PCI-E SSD into your system. Fully equipped to house a range of M.2 SSDs into a PCI-E x4 lane. This is a simple and elegant solution to replace your current HDDs. Once installed you can use this adapter to boot to the M.2 at high SATAIII speeds.
A high performance PCIe x8 10 gigabit network card, using Intel 82599ES high performance 10 Gigabit Ethernet Chip. It provides two 1000 Mbps SFP+ interfaces and supports PCIe 2.0. The physical sequence of each network port can be reach 128-bit to send and receive. The module is designed according to the specification of PCIe, and it has a strong applicability and can be used in the network security of the platform or motherboard. It can also be applied to the server equipment to meet the needs of the bandwidth.
This M.2 adapter turns a regular M.2 SSD drive into a U.2
SSD. The drive can then connect to SFF-8643 connector in
the system via a SFF-8639 to U.2 cable, resulting in a drive
with the same performance as it would be if it had been
installed on a PCIe slot.
IOCrest SI-ADA40121 provides the capability to utilize an Intel 750 Series 2.5" NVMe SSD (SFF-8639). Comes with PCIe 3.0 x4 (12 Gbps) bandwidth that can be used if motherboard comes with M.2 M-key slot. Otherwise M.2 adapter will be needed.
IOCrest SI-PEX40119 allows you to install a U.2 2.5 inch SSD drive (the Intel 7550 U.2 SSD) via a PCIe 3.0 x4 card onto your system. Perfect device for High Performance users that need Enterprice-Class hardware.
Use this cable to connect a U.2 port (SFF-8639) to a mini SAS HD (SFF-8643) connector. U.2 Ports come in M.2 Adapters that use M-key (NVMe). Please Update to add native driver support in NVM Express in Windows 7 and Windows Server 2008 R2 https://support.microsoft.com/en-us/kb/2990941 Windows 10 comes with those drivers preinstalled.
The IOCrest SY-HUB24047 with Realtek RTL8153 10/100/1000M ethernet controller combines an IEEE 802.3u compliant media access controller (MAC), the RTL8153 offers high-speed transmission over CAT 5 UTP cable or CAT 3 UPT (10Mbps only) cable. Functions as crossover detection and auto-correction, polarity correction, adaptive equalizer, cross-talk cancellation, echo cancellation, timing recovery and error correction are implemented to provide robust transmission and reception capabilities.
The 384KHz/32bit DSD USB Audio DAC is an ultra transparent mastering grade digital audio playback system. The 384KHz/32bit DSD Dac is capable of converting high resolution PCM audio up to 384KHz and DSD audio (up to 128xDSD).
With the new iPhone 7, you will no longer have access to an audio jack for your audio experiences. To use your existing wired headsets or headphones, you will need an adapter. It is compatible for use on all the Apple iPhone cell phone: Apple iPhone 7 / 7 plus / 6 / 6 plus / 6s / 6s plus / 5 / 5s
The M.2 B&M Key PCIe SATA RAID controller card employs the Marvell HyperDuo technology to take the advantages of the rapid response of a solid state drive and the spacious capacity of a hard disk drive, to form an ultimate total solution for a high performance, cost effective and large storage system.